JTM XXX Green 110-120mm ARF Special Order

JTM XXX Green 110-120mm ARF Special Order
Click To Enlarge
  • Item #: JTM-XJ001
  • Manufacturer: Jet Teng Models
  • Manufacturer's Product Number: JTM-XJ001
  • Condition: New
Price $1,334.99
Sale Price $1,259.99
Availability Out-of-Stock

Special Order the Jet Teng Models XXX 110-120 mm EDF jet that features unparalleled detail and craftsmanship.  By purchasing this jet, please allow an estimated 8 weeks for delivery. The jets are custom made per order at the factory. The order will be shipped by EMS Speedpost until it reaches US Customs.  Then it will be transferred to USPS for delivery to the customer.

DETAIL INFORMATION:

    The Jet Teng Models XXX ARF is an edf jet that offers high performance and very high detail.  The jet is a full composite 110-120mm edf jet that features a fiberglass wing as well as a fiberglass fuse, fin, and stabilizer.  The jet comes prepainted from the factory with decals applied and a clear coat finish to protect the jet.

CONSTRUCTION INFORMATION:

   Along with the cosmetic detail of the Jet Teng Models, the engineering and construction detail rivals the appearance.  It is designed for 110-120mm fan units.  But can also take Turbine power plants. The front air inducting is factory installed and exhaust ducting is included.  Retracts are easy to install with mounts pre-installed in the nose and hatches ready for cut out in the wing. In addition, the canopy is glued together and all hatchwork is done at the factory with hatch locks installed. The plane features aileron, elevator, rudder, throttle and flap funtion standard.  Optional features would be retracts and nose gear steering.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

The xXx features removable wings for easy transport to and from the flying field!

SPECIFICATIONS:

  • EDF Size: 110-120 mm edf or Turbine
  • Wing Span: 1490mm (58.5'')
  • Length: 1700mm (67'')
  • Estimated Power: 13-17 lbs
  • Recommended Power: 10-14S Li-Po System and Motor (Estimated based on motor)
  • Brushless Motor: Suitable for a 110-120 motor like the HET 700-83 and 700-98 Series

ITEMS NEEDED FOR COMPLETION:

  • Li-Po Battery: 10-14S 30C 4000 mAh or higher
  • Brushless Motor
  • ESC: High Voltage ESC
  • Castle Creations Pro BEC
  • 110-120 MM Fan Unit: Schubeler, JTM or Changesun EDF's
  • Servos:
  • 6x Hitec HS-5125MG or HS-125MG for Ailerons, Flaps, Elevator
  • 1x Hitec HS-85MG for Rudder

Optional Parts:

  • 1x Hitec HS-82 for Retracts
  • 1x Hitec HS-225MG for Steerable Nose Gear
  • 24 Inch Servo Extensions: x7
  • 2 ft: Red and Black Silicone Wire
  • Minimum 5 channel receiver and transmitter
  • Landing Gear

Set Up:

Center of Gravity : 195mm measured from leading edge of wing at root.

Control Throws:

 

 

Rate

Travel

Expo

Elevator

Low

High

+/- 9 mm

+/- 12mm

6%

10%

Aileron

Low

High

+/- 10mm

+/- 13mm

25%

30%

Rudder

Low

High

+/- 15 mm

+/- 20mm

20%

25%

Flaps

Takeoff

Landing

  9 mm

  35mm

No Elevator mix required

 

OPTIONAL ITEMS:

Jet Teng Electric Retract System(Not Included with arf)- Available as an option which much be bought at time of check out.

  • 1 servo needed for steering operation
  • Weight: 225g/ 75 g each- 28oz/ 8 oz each
  • Total Plane Weight: 10-14 lbs.

Jet Teng Oleo Struts feature an airbrake system installed(Not Included with arf)- Available as an option which much be bought at time of check out.

  • Machined aluminum oleo strut action
  • Air Brake System
  • Weight: 455g/ 16 oz
  • Total Plane Weight: 10-16 lbs.

Related Items