The TF Models A-4 Skyhawk offers super detail in a full composite airframe.  The A-4 features a removable canopy which makes battery access easy.  The entire rear fuselage can be removed for access to the edf or turbine unit.  Designed for a 90mm edf unit, but it can also take a Jetcat P20 turbine.  The kit comes painted out of the mold.  The flying surfaces are vacuum bagged making them durable and strong, yet lightweight.  Ailerons are prehinged and is retract ready with factory installed retract mounts.  The air inlet ducting is also reinforced for the latest high power 90mm edf units.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

SPECIFICATIONS:

• Length: 48 Inches/ 1220mm
• Wing Span: 35.5 Inches/ 900mm
• Flying Weight: 5.5lbs/ 2.5kg

Needed for Completion:

• 90mm EDF Unit: HET, Schubeler etc..
• 90mm Brushless Motor
• Micro Servos: 2x Ailerons, 1x Elevator, 1x Rudder
• Optional Servos: 2x Retract system
• Li-Po Battery
• 3x 18" Servo Extensions (Ailerons/ Throttle)
• 2x 24" Servo Extension- Elevator/Rudder
• 2 Feet Red Silicone Wire
• 2 Feet Black Silicone Wire

Optional:

• HET Micro Retract Units