RC Lander 90mm DPS/MBS 1400kv 8S 12 Blade EDF

RC Lander 90mm DPS/MBS 1400kv 8S 12 Blade EDF
Click To Enlarge
  • Item #: LEDFDPS/MBS90S-1A14-8S
  • Manufacturer: RC Lander
  • Manufacturer's Product Number: LEDFDPS/MBS90S-1A14-8S
  • Condition: New
  * Marked fields are required.
Qty*
Price $179.99
Sale Price $159.99
Availability In-Stock

LEDFDPS/MBS90S-1A14-8S:New Cone Style DPS Metal EDF sets:which is a new design cone style housing with 9 stators and bigger blades rotor size. Cone style housing can be easily accelerated the rotor air-flow speed for increasing the thrust power. So it can be provided higher thrust power up to 4.2kg/ 115A by 8S,668g including the motor.

All RC Lander fans and motors are test run at the factory to ensure that they are in proper operating manner before being shipped out. The fans are put through a series of tests to ensure that they are operating as intended. Be sure to reference the instruction manual for proper motor and esc program settings.

FEATURES:

A lot of EDF units are made of plastic material which during operation creates high temperature. This results in loss of power and the possibiltiy of damage to the motor, battery or speed control. Heat sinks help, but this only offers average improvement. RC Lander Technology uses special metals to imporve dissapation of heat in their EDF units. The shroud, spinner and tail pipe are made with a special aluminum alloy that is efficient at heat dissapation. Because of this, the whole shroud acts as a heat sink, removing heat from the motor. The motor and fan unit comes assembled and balanced from the factory. A thermal grease compound is used between the motor and shroud to further help dissipate heat. This is the same compound that is used in computer processors and heat sinks. This design creates a more efficiently running motor and will provide peak performance while extending the lifespan of the motor.

Motor construction consist of a 4 pole motor giving beter performance which translates into higher rpm's and efficiency.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

SPECIFICATIONS:

  • Material: Aluminum Alloy
  • Weight: 24 oz./ 680g
  • Rotor: 90 mm dia., 12-bladed
  • Inner Diameter: 91.5mm
  • Outer Diameter: 94mm
  • Exhaust Diameter: 86.5mm

8S Li-Po Set Up:

  • Max RPM: 41,440 rpm
  • Kv Rating: 1400
  • Thrust: 4.2kg/ 9.25 lb. (This is only an estimation and not a guarantee)
  • Start: Soft
  • Timing: Medium
  • Amp Rating: 115 amp
  • Bell curve screws off to create a straight inlet edf unit.

WARNING:Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.

Related Items