RBC Kits Hawker Hunter 70mm Kit

RBC Kits Hawker Hunter 70mm Kit
Click To Enlarge
  • Item #: RBC6053
  • Manufacturer: RBC Kits
  • Manufacturer's Product Number: RBC6053
  • Condition: New
  * Marked fields are required.
*
Qty*
Price $164.99
Sale Price $124.99
Availability In-Stock

The Hawker Hunter is arguably one of the most attractive jets ever built and RBC Kits has gone to great lengths to retain that ‘character’ in the kit. RBC has tried to keep the design as close to scale as possible, with the only deviations being made on the basis of necessity.

The design of the fuselage looks complex at first glance, but is actually very simple and quick to build. The fuselage formers are made from 2mm birch ply and are accurately cut on a CNC machine to give strength where required and reduced weight where possible, and because of their rigidity, ‘thinness’ and weight saving cutouts, the building process is less prone to mishaps.

The forward ‘Vac-Formed’ inlet ducts are easy to install and have been carefully designed to provide maximum performance with the minimum of drag. RBC spent a lot of time getting this area right!! The inlets are of course ‘over-scale’ in size, but only as much as is necessary to feed the fan with the correct amount of air. Only the ‘purists’ are likely to know!!

The fuselage is sheeted in 1.5mm (1/16th) balsa and is surprisingly easy and quick to do. Wings are conventional in construction and the section chosen is particularly suited to this scale plan-form and the projected flight envelope. The characteristic ‘sawtooth’ leading edge is incorporated and the scale anhedral helps prevent ‘Dutch Rolling’ in this swept wing design. A small amount of ‘washout’ is also built in for low speed stability.

The tail area is very slightly over scale, as a result of flight-testing, yet is not obvious to the eye. The fin has a simple built-up structure and is amazingly rigid when assembled.

For the scale-orientated modeller, we’ve included vacuum formings for the air brake and forward cannon shell clip collectors.

The choice of colour schemes is the standard camouflage of 74 Sqn RAF and a full set of decals are supplied.

The outlet nozzle is for the non ‘brake-chute’ version but could be easily modified.

Flight performance can be ‘sedate’ or ‘ballistic’ with a 480-sized brushless inrunner motor giving around 3500kv. Our prototype used the Wemotec 480 Minifan 69mm fan unit but other fan units of the same size can also be used, such as the HET 6904.

The battery pack is significant in the overall weight of the model and you should make a careful choice, bearing in mind capacity, cell size/weight and ability to deliver high current. The design will accommodate a wide variety of cell types by positioning the pack accordingly. Please bear in mind that this model is designed to be ‘bungee’ launched and it’s static thrust will be insufficient to even attempt hand launching unless using the top end motor/cell combination.

You will need three small servos (around 9g), two of which should be not much more than 9mm thick. The wing thickness will only accommodate servos of this size but there are many to choose from in this category at reasonable prices. The receiver is less important but the lighter the better. She can be flown on three or four channels. Four channel versions allow fine tuning of the ailerons by mixing two channels together but this is not really necessary.

Flight characteristics are similar to many high-performance, high load models on the market today. Not a beginners model, but fine for the moderately experienced pilot who is used to fast, small models. It’s a sleek design and bleeding the speed off for landing requires a reasonably long approach at low level. Like all swept-wing, jet style models, high ‘G’ low speed turns should be avoided. Just fly her like a jet in wide sweeping manoeuvres and you’ll be rewarded with a stunning performance. Everybody that has seen her fly seems to love her.

If you’re looking for a great EDF model (maybe your first), then the West Wings Hawker Hunter is a perfect choice.

The RBC Kit Hawker Hunter is a balsa/ply build kit that will create a great looking jet that is easy to repair.  The RBC kit features construction of balsa, plywood and abs plastic to make an easy to build/repair kit that has great flying characteristics.  The Hawker Hunter can serve as an advanced aerobatic edf jet for the seasoned jet flyer. The kit contains all parts cnc cut including all wood to finish the kit.  A full size cad drawing is also included along with a vacuum formed canopy. Instructions have photos on a cd.  The Hawker Hunter is designed for bungee launching and works extemely well with the Jetapult launching system from Fan Jets USA.

Decals included in kit as pictured.

SPECIFICATIONS:
Wingspan: 707mm/ 27.8 Inches
Fuse Length: 965mm/ 38 Inches
Flying Weight: 900 g./ 2 lb. and up
Wing Area: 15dm2
Wing Loading: 64g dm2 to 75gr dm2
Three channel operation: Aileron, Elevator and throttle.
Features:
All formers and ribs CNC cut
One piece design for easy transport and structural strength
Instructions
Full sized rolled CAD plans with all parts shown
Vacuformed canopy
Paper intake tube, paper outlet tube
Control horns, steering cables

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

ITEMS NEEDED FOR COMPLETION:

  • Ducted Fan: 70mm class fan unit- HET 6904, Wemotec Minifan, Schubeler DS-30 and others
  • Brushless Motor: 70mm Class
  • Electronic Speed Control: Brushless
  • Servos (Micro, 9g): 2 for aileron operation: 1 for elevator
  • Li-Po Battery: Dependant upon the motor choosen (3-4S up to 3,200mAh)
  • 1 ft Red and Black Silicone Wire
  • Battery and Gilt Connectors
  • CA and Epoxy glues
  • 2x 24 in/ 457 mm Servo Extensions
  • Recommended RBC Setup: HET 2W motor, 3S 3700mAh 35C Lipo,  HET 2W-20 or HET 3W.

 

Best Values

Related Items