The HET 240-15 6000kv is designed for pylon /EDF jets in the 50-64mm fan unit size. It is suitable for 50-64mm edf units.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

SPECIFICATIONS:

• Diameter : 24 mm
• Length : 29 mm
• Shaft Dia. : 3.17 mm
• Li-Po: 2-3S
• Weight : 55 grams
• No load current(lo) : 1.8
• Internal resistance: 0.056
• KV : 6000
• No. of poles: 4
• Max Current: 32 A
• Max efficiency: 87%
• Power Nominal: 300 Watts
• Recommended 50-64mm edf unit 

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.