HET Typhoon EDF 1W-30

HET Typhoon EDF 1W-30
Click To Enlarge
  • Item #: HET1W30
  • Manufacturer: High End Technology
  • Manufacturer's Product Number: HET1W30
  • Condition: New
  * Marked fields are required.
Qty*
Price $74.99
Sale Price $61.99
Availability In-Stock

The 1W-30 is designed for pylon /EDF jets. Suitable for the HET EDF unit 6904 or WeMoTec 480 mini fan.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

SPECIFICATIONS:

  • Diameter: 28 mm
  • Length: 53 mm
  • Shaft Dia.: 4 mm
  • Li-Po: 3-4S
  • Weight: 130 grams
  • No load current(lo): 5.5
  • Internal resistance: 4.5
  • KV: 4400
  • No. of poles: 6
  • Max Current: 120 A
  • Max efficiency: 87%
  • Power Nominal: 1400Watts (on 4S with 6904 EDF)
  • It is not recommended to use more than 4S lipo due to burning up the motor.  35C lipo cells or higher are recommended.

 

Recommended ESC setup:
Cutoff Voltage: Auto
Current Limiting: Standard
Brake Type: Disable
Timing Advance: Middle 18 deg
Cutoff Type: Hard
Start Type: Fast Start
Governor Mode: Auto
PWM: 16K

Comes with Heat Sink

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.