HET Typhoon Brushless motor 600-43 90MM
HET Typhoon Brushless motor 600-43 is designed for EDF jets and medium size models up to 3,500 grams. Specially made for HET 9305 90mm fan unit. It will also work with the Schubeler DS-51 fan unit.
FOR MORE INFORMATION: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.
SPECIFICATIONS:
- Diameter: 36 mm/1.42 inch
- Length: 85 mm
- Shaft Dia.: 5 mm
- Li-Po: 10-12S
- Weight: 290 grams
- Poles: 6
- Internal resistance: 46
- No load current(lo): 0.8
- No load KV: 1100
- Max Current: 80 A
- Max efficiency: 80%
- Power Nominal: 1400Watts
- Recommended Props:
- 7 X 5 for gliders
- 16 x 8 for sports planes
Comes with Heat Sink
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.