High End Technology's F-86 Sabre 70mm ARF edf jet. The F-86 Sabre features a composite fusalage and foam core, balsa sheeted wings.

One of the most recognizable jets during the Korean War. The F-86 offers classic lines and great fligh characteristics. This edf jet is a good chioce for beginners as well as seasoned edf flyer. The HET F-86 features an instruction manual written by the Fan Jets USA staff along with prototype test flights.

SPECIFICATIONS:

• Wingspan: 37.5 in/ 953 mm
• Weight: 2.4 to 3.5 lbs. / 1088 to 1588 grams
• Length: 37 in/ 940 mm
• Fiberglass fuselage
• Balsa foam sheeted wings
• Pre-built factory intake assembly
• Retract wing mounts pre-installed
• Can fit HET mini retract (modification is needed)
• Retract mounts installed in wings and formers included for nose gear installation. Wheels incldued as well.
• Wing Tip Tanks are optional

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

ITEMS NEEDED FOR COMPLETION:

• Ducted Fan: HET 6904 or 70mm class fan unit
• Brushless Motor
• Electronic Speed Control
• Servos: 3 for regular operation (2-Ailerons and Elevator) Additional 2 servos needed for retract operation.
• Li-Po Battery: 4 cell or smaller will fit in the fuse
• 3 in Y Servo Connector-Ailerons
• 1 ft Red and Black Silicone Wire
• Battery and Gilt Connectors
• CA and Epoxy glues
• 2x 18 in/ 457 mm Servo Extensions- Ailerons
• 12 in/ 305 mm Servo Extensions- Elevator

Optional Wing Tip Tanks