High End Technology offers the A-10 Thunderbolt ARF in a composite fuse with foam and balsa sheeted wings. The A-10 offers great looks with superb flight characteristics.

SPECIFICATIONS:

• Wingspan: 42.5 inches/ 1080 mm
• Length: 39 inches/ 990 mm
• Weight: 3.5 to 4.5 lbs./ 1587 to 2041 grams
• Ducted Fan: HET 6904 or 70 mm class fan unit

FEATURES:

• Fibarglass composite fusalage
• Foam core, balsa sheeted wings
• Retract mounting kit included
• Fiberglass composite fins and engine nacelles
• Step by step instructions

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

ITEMS NEEDED FOR COMPLETION:

• 2X 480 Class Brushless Motors: HET 3W, 2W, 2W-20, 2W-25 motors
• 2x 54 to 80 amp esc's (if using 2W series motors) if using 3W series, use a 36 amp esc
• 2x 70 mm fan unit
• Servos: 3x HS-65 or higher for regular operation (2x-Ailerons, 1x-Elevator) An additional two are required if using retracts.
• 2x Li-Po Battery- Recommended 3S to 4S 3300mAh to 3700mAh
• 3x 24" Servo Extensions
• 2x 18" Servo Extensions
• 2x 3" "Y" Servo Connector
• 4x 1' Red Silicone Wire
• 4x 1' Blk Silicone Wire
• 1x 3.5 Gilt/Bullet Connector
• 2x Deans Connector  

OPTIONAL ITEMS:

• Jetapult Bungee Launch System
• HET Retract Kit (2 Servos needed for operation)
• HS 82 or 85 Servos for more torque
• Castle Creations 10 amp BEC if using more than 4 servos