E-Flite BL32 Ducted Fan Motor, 2150Kv
- Item #: EFLM3032DFA
- Manufacturer: E-Flite
Overview:
E-flite's BL32 DF Brushless Motor is an ideal choice for products such as E-flite’s Habu 32 DF and other similar-sized ducted fan airplanes when using the purpose-built Delta-V 32 80mm EDF (EFLDF32). The motor will provide great performance in 80mm diameter fan units requiring a 28mm inrunner motor.
Key Features:
- 6-pole design
- Ideal for 80mm EDF Units
- Includes mounting hardware
- Purpose-built for the E-flite® Delta-V® 32 80mm EDF unit
- Up to 1,400 continuous input watts or 1,665 maximum burst
- High-quality construction with ball bearings and hardened steel shaft
Specifications:
| Type: | Brushless Inrunner |
| Size: | 32-size for Ducted Fans |
| Bearings or Bushings: | Bearings |
| Wire Gauge: | 14 AWG |
| Voltage: | 14.8V - 22.2V |
| RPM/Volt (Kv): | 2150Kv |
| Resistance (Ri): | 0.026Ω |
| Idle Current (Io): | 2.6A @ 20V |
| Continuous Current: | 62A |
| Maximum Burst Current: | 75A |
| Cells: | 4S-6S Li-Po or 14-18 cells NiCd/NiMH |
| Speed Control: | 80A |
| Weight: | 5.70 oz (162g) |
| Overall Diameter: | 1.10 in (28.0mm) |
| Shaft Diameter: | 0.20 in (5.0mm) |
| Overall Length: | 2.00 in (52.0mm) |
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important the these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
