Use the Phoenix-35 when you need more power from your medium sized motors, or are looking for the best brushless controller for your Corona, ECO 8, or Voyager heli. From 3-4 pound sport flyers to helicopters, the Phoenix-35 has the capability and smooth reliability you need.

The Phoenix-35 gives you the flexibility you have come to expect from Castle Creations controllers. With a total of 7 user-programmable features this speed control has it all.

BUILDERS NOTE: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

USER PROGRAMMABLE FEATURES INCLUDE:

• Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
• Over-Current Protection - 5 settings
• Brake Type - 5 settings
• Throttle Range - fixed/self-adjusting/governor
• Timing Advance - 3 choices
• Cutoff Type - hard or soft
• Switching Frequency - 3 choices

SPECIFICATIONS:

• Retail Price: $99.95
• Volts w/BEC: 12.6 max
• Volts NO BEC: 19.2 max
• Lipo Cells w/BEC: 3S max
• Lipo Cells NO BEC: 5S max
• NiCad or NiMh Cells w/BEC: 12 max
• NiCad or NiMh Cells NO BEC: 16 max
• Continuous: 35 amps
• Switching Rate: Programmable (11, 22, or 41 khz)
• Resistance: 0.0045 ohms
• Brake: Yes
• Reversible: Yes - change any two wires
• Low Voltage
• Cut-off Programmable
• Size: 0.95 x 1.72 x 0.4"
• Weight: (w/wires) 0.9 oz (24.5g)
• Connector Type: Universal

ALL CASTLE CREATIONS CONTOLLERS INCLUDE:

• Battery Eliminator Circuit (BEC): eliminates receiver battery
• Safe "Power On"
• Microprocessor Controlled
• Tough surface mount construction
• Audible Arming Signal
• Auto Motor cut-off with reset
• Low torque "Soft Start": protects gear boxes and belt drives from shock.
• Smooth reverse exponential throttle
• Self-calibrating endpoints: maximizes usable stick travel
• Auto shut-down when signal is lost
• Simple setup: no complicated switches or wiring