The Arc brushless motors offer excellent efficiency and durability.  This motor will give great performance on a 3-4S battery.  This motor will work with fan units like the HET 6904, Schubeler DS-30 and WeMoTec Mini Fan 480.

FOR MORE INFORMATION: REFER TO THE "ELECTRIC SETUP GUIDELINE" ON THE HOME PAGE TO HELP DETERMINE THE PROPER SET UP FOR FAN, ESC, MOTOR AND BATTERY.

USING SCREWS LONGER THAN THOSE PROVIDED CAN SHORT THE WINDINGS AND RUIN THE MOTOR. TEST FIT SCREWS BEFORE TIGHTENING. PLEASE SEE WARRANTY LINK BELOW FOR MORE INFO.

500 watts recommended power, this motor requires sufficient cooling. As with all of the ARC's this can be exceeded as long as the motor stays cool.

SPECIFICATIONS:

• Diameter: 28mm
• Length: 48mm (Long Can)
• Turns/ Windings: 1 Turn
• Li-Po: 3-4S
• 1 Turn @ 12V:
• No Load Current: 2.8A
• Rm: 0.009 Ohms
• No Load Speed: 51,000 rpm
• Recomended Output: 500 watts
• Rated Current: 50 amps
• Rated Speed: 35,000 rpm
• KV: 4250
• Weight: 113g
• Shaft: 3.2 mm
• Approx Weight: 110g
• Poles: 4

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.